M210 × 8 Metric Thread Dimensions
Nominal diameter 210 mm; pitch 8 mm.
Basic geometry
Basic pitch diameter: 204.804 mm. Basic minor diameter: 201.34 mm. Basic major diameter: 210 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210 | Not specified |
| Pitch | 204.804 | 205.104 |
| Minor | 201.34 | 201.97 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210.1 | Not specified |
| Pitch | 204.904 | 205.279 |
| Minor | 201.44 | 202.24 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210 | Not specified |
| Pitch | 204.804 | 205.179 |
| Minor | 201.34 | 202.14 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210.1 | Not specified |
| Pitch | 204.904 | 205.379 |
| Minor | 201.44 | 202.44 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210 | Not specified |
| Pitch | 204.804 | 205.279 |
| Minor | 201.34 | 202.34 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210.1 | Not specified |
| Pitch | 204.904 | 205.504 |
| Minor | 201.44 | 202.69 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210 | Not specified |
| Pitch | 204.804 | 205.404 |
| Minor | 201.34 | 202.59 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210.1 | Not specified |
| Pitch | 204.904 | 205.654 |
| Minor | 201.44 | 203.04 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210 | Not specified |
| Pitch | 204.804 | 205.554 |
| Minor | 201.34 | 202.94 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 209.19 | 209.9 |
| Pitch | 204.349 | 204.704 |
| Root d3 | 199.421 | 200.085 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 209.19 | 209.9 |
| Pitch | 204.48 | 204.704 |
| Root d3 | 199.552 | 200.085 |
Cutting tap preparation
Pre-drill recommendation: 202 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 206.5 mm. Approximate formation model. Estimated formation: 64.3%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.