M210 × 6 Metric Thread Dimensions
Nominal diameter 210 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 206.103 mm. Basic minor diameter: 203.505 mm. Basic major diameter: 210 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210 | Not specified |
| Pitch | 206.103 | 206.368 |
| Minor | 203.505 | 204.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210.08 | Not specified |
| Pitch | 206.183 | 206.518 |
| Minor | 203.585 | 204.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210 | Not specified |
| Pitch | 206.103 | 206.438 |
| Minor | 203.505 | 204.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210.08 | Not specified |
| Pitch | 206.183 | 206.608 |
| Minor | 203.585 | 204.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210 | Not specified |
| Pitch | 206.103 | 206.528 |
| Minor | 203.505 | 204.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210.08 | Not specified |
| Pitch | 206.183 | 206.713 |
| Minor | 203.585 | 204.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210 | Not specified |
| Pitch | 206.103 | 206.633 |
| Minor | 203.505 | 204.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210.08 | Not specified |
| Pitch | 206.183 | 206.853 |
| Minor | 203.585 | 204.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210 | Not specified |
| Pitch | 206.103 | 206.773 |
| Minor | 203.505 | 204.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 209.32 | 209.92 |
| Pitch | 205.708 | 206.023 |
| Root d3 | 202.012 | 202.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 209.32 | 209.92 |
| Pitch | 205.823 | 206.023 |
| Root d3 | 202.127 | 202.559 |
Cutting tap preparation
Pre-drill recommendation: 204 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 207.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.