M210 × 4 Metric Thread Dimensions
Nominal diameter 210 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 207.402 mm. Basic minor diameter: 205.67 mm. Basic major diameter: 210 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210 | Not specified |
| Pitch | 207.402 | 207.638 |
| Minor | 205.67 | 206.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210.06 | Not specified |
| Pitch | 207.462 | 207.762 |
| Minor | 205.73 | 206.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210 | Not specified |
| Pitch | 207.402 | 207.702 |
| Minor | 205.67 | 206.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210.06 | Not specified |
| Pitch | 207.462 | 207.837 |
| Minor | 205.73 | 206.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210 | Not specified |
| Pitch | 207.402 | 207.777 |
| Minor | 205.67 | 206.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210.06 | Not specified |
| Pitch | 207.462 | 207.937 |
| Minor | 205.73 | 206.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210 | Not specified |
| Pitch | 207.402 | 207.877 |
| Minor | 205.67 | 206.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210.06 | Not specified |
| Pitch | 207.462 | 208.062 |
| Minor | 205.73 | 206.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210 | Not specified |
| Pitch | 207.402 | 208.002 |
| Minor | 205.67 | 206.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 209.465 | 209.94 |
| Pitch | 207.062 | 207.342 |
| Root d3 | 204.598 | 205.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 209.465 | 209.94 |
| Pitch | 207.162 | 207.342 |
| Root d3 | 204.698 | 205.033 |
Cutting tap preparation
Pre-drill recommendation: 206 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 208.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.