M210 × 3 Metric Thread Dimensions
Nominal diameter 210 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 208.051 mm. Basic minor diameter: 206.752 mm. Basic major diameter: 210 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210 | Not specified |
| Pitch | 208.051 | 208.263 |
| Minor | 206.752 | 207.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210.048 | Not specified |
| Pitch | 208.099 | 208.364 |
| Minor | 206.8 | 207.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210 | Not specified |
| Pitch | 208.051 | 208.316 |
| Minor | 206.752 | 207.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210.048 | Not specified |
| Pitch | 208.099 | 208.434 |
| Minor | 206.8 | 207.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210 | Not specified |
| Pitch | 208.051 | 208.386 |
| Minor | 206.752 | 207.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210.048 | Not specified |
| Pitch | 208.099 | 208.524 |
| Minor | 206.8 | 207.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210 | Not specified |
| Pitch | 208.051 | 208.476 |
| Minor | 206.752 | 207.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210.048 | Not specified |
| Pitch | 208.099 | 208.629 |
| Minor | 206.8 | 207.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210 | Not specified |
| Pitch | 208.051 | 208.581 |
| Minor | 206.752 | 207.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 209.577 | 209.952 |
| Pitch | 207.753 | 208.003 |
| Root d3 | 205.905 | 206.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 209.577 | 209.952 |
| Pitch | 207.843 | 208.003 |
| Root d3 | 205.995 | 206.271 |
Cutting tap preparation
Pre-drill recommendation: 207 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 208.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.