M210 × 2 Metric Thread Dimensions
Nominal diameter 210 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 208.701 mm. Basic minor diameter: 207.835 mm. Basic major diameter: 210 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210 | Not specified |
| Pitch | 208.701 | 208.881 |
| Minor | 207.835 | 208.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210.038 | Not specified |
| Pitch | 208.739 | 208.963 |
| Minor | 207.873 | 208.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210 | Not specified |
| Pitch | 208.701 | 208.925 |
| Minor | 207.835 | 208.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210.038 | Not specified |
| Pitch | 208.739 | 209.019 |
| Minor | 207.873 | 208.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210 | Not specified |
| Pitch | 208.701 | 208.981 |
| Minor | 207.835 | 208.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210.038 | Not specified |
| Pitch | 208.739 | 209.094 |
| Minor | 207.873 | 208.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210 | Not specified |
| Pitch | 208.701 | 209.056 |
| Minor | 207.835 | 208.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210.038 | Not specified |
| Pitch | 208.739 | 209.189 |
| Minor | 207.873 | 208.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 210 | Not specified |
| Pitch | 208.701 | 209.151 |
| Minor | 207.835 | 208.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 209.682 | 209.962 |
| Pitch | 208.451 | 208.663 |
| Root d3 | 207.219 | 207.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 209.682 | 209.962 |
| Pitch | 208.531 | 208.663 |
| Root d3 | 207.299 | 207.508 |
Cutting tap preparation
Pre-drill recommendation: 208 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 209.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.