M200 × 8 Metric Thread Dimensions
Nominal diameter 200 mm; pitch 8 mm.
Basic geometry
Basic pitch diameter: 194.804 mm. Basic minor diameter: 191.34 mm. Basic major diameter: 200 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200 | Not specified |
| Pitch | 194.804 | 195.104 |
| Minor | 191.34 | 191.97 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200.1 | Not specified |
| Pitch | 194.904 | 195.279 |
| Minor | 191.44 | 192.24 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200 | Not specified |
| Pitch | 194.804 | 195.179 |
| Minor | 191.34 | 192.14 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200.1 | Not specified |
| Pitch | 194.904 | 195.379 |
| Minor | 191.44 | 192.44 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200 | Not specified |
| Pitch | 194.804 | 195.279 |
| Minor | 191.34 | 192.34 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200.1 | Not specified |
| Pitch | 194.904 | 195.504 |
| Minor | 191.44 | 192.69 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200 | Not specified |
| Pitch | 194.804 | 195.404 |
| Minor | 191.34 | 192.59 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200.1 | Not specified |
| Pitch | 194.904 | 195.654 |
| Minor | 191.44 | 193.04 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200 | Not specified |
| Pitch | 194.804 | 195.554 |
| Minor | 191.34 | 192.94 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 199.19 | 199.9 |
| Pitch | 194.349 | 194.704 |
| Root d3 | 189.421 | 190.085 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 199.19 | 199.9 |
| Pitch | 194.48 | 194.704 |
| Root d3 | 189.552 | 190.085 |
Cutting tap preparation
Pre-drill recommendation: 192 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 196.5 mm. Approximate formation model. Estimated formation: 64.3%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.