M200 × 6 Metric Thread Dimensions
Nominal diameter 200 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 196.103 mm. Basic minor diameter: 193.505 mm. Basic major diameter: 200 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200 | Not specified |
| Pitch | 196.103 | 196.368 |
| Minor | 193.505 | 194.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200.08 | Not specified |
| Pitch | 196.183 | 196.518 |
| Minor | 193.585 | 194.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200 | Not specified |
| Pitch | 196.103 | 196.438 |
| Minor | 193.505 | 194.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200.08 | Not specified |
| Pitch | 196.183 | 196.608 |
| Minor | 193.585 | 194.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200 | Not specified |
| Pitch | 196.103 | 196.528 |
| Minor | 193.505 | 194.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200.08 | Not specified |
| Pitch | 196.183 | 196.713 |
| Minor | 193.585 | 194.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200 | Not specified |
| Pitch | 196.103 | 196.633 |
| Minor | 193.505 | 194.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200.08 | Not specified |
| Pitch | 196.183 | 196.853 |
| Minor | 193.585 | 194.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200 | Not specified |
| Pitch | 196.103 | 196.773 |
| Minor | 193.505 | 194.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 199.32 | 199.92 |
| Pitch | 195.708 | 196.023 |
| Root d3 | 192.012 | 192.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 199.32 | 199.92 |
| Pitch | 195.823 | 196.023 |
| Root d3 | 192.127 | 192.559 |
Cutting tap preparation
Pre-drill recommendation: 194 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 197.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.