M200 × 4 Metric Thread Dimensions
Nominal diameter 200 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 197.402 mm. Basic minor diameter: 195.67 mm. Basic major diameter: 200 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200 | Not specified |
| Pitch | 197.402 | 197.638 |
| Minor | 195.67 | 196.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200.06 | Not specified |
| Pitch | 197.462 | 197.762 |
| Minor | 195.73 | 196.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200 | Not specified |
| Pitch | 197.402 | 197.702 |
| Minor | 195.67 | 196.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200.06 | Not specified |
| Pitch | 197.462 | 197.837 |
| Minor | 195.73 | 196.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200 | Not specified |
| Pitch | 197.402 | 197.777 |
| Minor | 195.67 | 196.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200.06 | Not specified |
| Pitch | 197.462 | 197.937 |
| Minor | 195.73 | 196.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200 | Not specified |
| Pitch | 197.402 | 197.877 |
| Minor | 195.67 | 196.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200.06 | Not specified |
| Pitch | 197.462 | 198.062 |
| Minor | 195.73 | 196.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200 | Not specified |
| Pitch | 197.402 | 198.002 |
| Minor | 195.67 | 196.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 199.465 | 199.94 |
| Pitch | 197.062 | 197.342 |
| Root d3 | 194.598 | 195.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 199.465 | 199.94 |
| Pitch | 197.162 | 197.342 |
| Root d3 | 194.698 | 195.033 |
Cutting tap preparation
Pre-drill recommendation: 196 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 198.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.