M200 × 3 Metric Thread Dimensions
Nominal diameter 200 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 198.051 mm. Basic minor diameter: 196.752 mm. Basic major diameter: 200 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200 | Not specified |
| Pitch | 198.051 | 198.263 |
| Minor | 196.752 | 197.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200.048 | Not specified |
| Pitch | 198.099 | 198.364 |
| Minor | 196.8 | 197.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200 | Not specified |
| Pitch | 198.051 | 198.316 |
| Minor | 196.752 | 197.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200.048 | Not specified |
| Pitch | 198.099 | 198.434 |
| Minor | 196.8 | 197.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200 | Not specified |
| Pitch | 198.051 | 198.386 |
| Minor | 196.752 | 197.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200.048 | Not specified |
| Pitch | 198.099 | 198.524 |
| Minor | 196.8 | 197.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200 | Not specified |
| Pitch | 198.051 | 198.476 |
| Minor | 196.752 | 197.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200.048 | Not specified |
| Pitch | 198.099 | 198.629 |
| Minor | 196.8 | 197.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200 | Not specified |
| Pitch | 198.051 | 198.581 |
| Minor | 196.752 | 197.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 199.577 | 199.952 |
| Pitch | 197.753 | 198.003 |
| Root d3 | 195.905 | 196.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 199.577 | 199.952 |
| Pitch | 197.843 | 198.003 |
| Root d3 | 195.995 | 196.271 |
Cutting tap preparation
Pre-drill recommendation: 197 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 198.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.