M200 × 2 Metric Thread Dimensions
Nominal diameter 200 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 198.701 mm. Basic minor diameter: 197.835 mm. Basic major diameter: 200 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200 | Not specified |
| Pitch | 198.701 | 198.881 |
| Minor | 197.835 | 198.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200.038 | Not specified |
| Pitch | 198.739 | 198.963 |
| Minor | 197.873 | 198.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200 | Not specified |
| Pitch | 198.701 | 198.925 |
| Minor | 197.835 | 198.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200.038 | Not specified |
| Pitch | 198.739 | 199.019 |
| Minor | 197.873 | 198.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200 | Not specified |
| Pitch | 198.701 | 198.981 |
| Minor | 197.835 | 198.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200.038 | Not specified |
| Pitch | 198.739 | 199.094 |
| Minor | 197.873 | 198.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200 | Not specified |
| Pitch | 198.701 | 199.056 |
| Minor | 197.835 | 198.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200.038 | Not specified |
| Pitch | 198.739 | 199.189 |
| Minor | 197.873 | 198.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 200 | Not specified |
| Pitch | 198.701 | 199.151 |
| Minor | 197.835 | 198.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 199.682 | 199.962 |
| Pitch | 198.451 | 198.663 |
| Root d3 | 197.219 | 197.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 199.682 | 199.962 |
| Pitch | 198.531 | 198.663 |
| Root d3 | 197.299 | 197.508 |
Cutting tap preparation
Pre-drill recommendation: 198 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 199.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.