M190 × 8 Metric Thread Dimensions
Nominal diameter 190 mm; pitch 8 mm.
Basic geometry
Basic pitch diameter: 184.804 mm. Basic minor diameter: 181.34 mm. Basic major diameter: 190 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190 | Not specified |
| Pitch | 184.804 | 185.104 |
| Minor | 181.34 | 181.97 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190.1 | Not specified |
| Pitch | 184.904 | 185.279 |
| Minor | 181.44 | 182.24 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190 | Not specified |
| Pitch | 184.804 | 185.179 |
| Minor | 181.34 | 182.14 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190.1 | Not specified |
| Pitch | 184.904 | 185.379 |
| Minor | 181.44 | 182.44 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190 | Not specified |
| Pitch | 184.804 | 185.279 |
| Minor | 181.34 | 182.34 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190.1 | Not specified |
| Pitch | 184.904 | 185.504 |
| Minor | 181.44 | 182.69 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190 | Not specified |
| Pitch | 184.804 | 185.404 |
| Minor | 181.34 | 182.59 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190.1 | Not specified |
| Pitch | 184.904 | 185.654 |
| Minor | 181.44 | 183.04 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190 | Not specified |
| Pitch | 184.804 | 185.554 |
| Minor | 181.34 | 182.94 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 189.19 | 189.9 |
| Pitch | 184.349 | 184.704 |
| Root d3 | 179.421 | 180.085 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 189.19 | 189.9 |
| Pitch | 184.48 | 184.704 |
| Root d3 | 179.552 | 180.085 |
Cutting tap preparation
Pre-drill recommendation: 182 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 186.5 mm. Approximate formation model. Estimated formation: 64.3%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.