M190 × 3 Metric Thread Dimensions
Nominal diameter 190 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 188.051 mm. Basic minor diameter: 186.752 mm. Basic major diameter: 190 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190 | Not specified |
| Pitch | 188.051 | 188.263 |
| Minor | 186.752 | 187.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190.048 | Not specified |
| Pitch | 188.099 | 188.364 |
| Minor | 186.8 | 187.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190 | Not specified |
| Pitch | 188.051 | 188.316 |
| Minor | 186.752 | 187.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190.048 | Not specified |
| Pitch | 188.099 | 188.434 |
| Minor | 186.8 | 187.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190 | Not specified |
| Pitch | 188.051 | 188.386 |
| Minor | 186.752 | 187.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190.048 | Not specified |
| Pitch | 188.099 | 188.524 |
| Minor | 186.8 | 187.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190 | Not specified |
| Pitch | 188.051 | 188.476 |
| Minor | 186.752 | 187.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190.048 | Not specified |
| Pitch | 188.099 | 188.629 |
| Minor | 186.8 | 187.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190 | Not specified |
| Pitch | 188.051 | 188.581 |
| Minor | 186.752 | 187.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 189.577 | 189.952 |
| Pitch | 187.753 | 188.003 |
| Root d3 | 185.905 | 186.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 189.577 | 189.952 |
| Pitch | 187.843 | 188.003 |
| Root d3 | 185.995 | 186.271 |
Cutting tap preparation
Pre-drill recommendation: 187 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 188.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.