M190 × 2 Metric Thread Dimensions
Nominal diameter 190 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 188.701 mm. Basic minor diameter: 187.835 mm. Basic major diameter: 190 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190 | Not specified |
| Pitch | 188.701 | 188.881 |
| Minor | 187.835 | 188.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190.038 | Not specified |
| Pitch | 188.739 | 188.963 |
| Minor | 187.873 | 188.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190 | Not specified |
| Pitch | 188.701 | 188.925 |
| Minor | 187.835 | 188.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190.038 | Not specified |
| Pitch | 188.739 | 189.019 |
| Minor | 187.873 | 188.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190 | Not specified |
| Pitch | 188.701 | 188.981 |
| Minor | 187.835 | 188.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190.038 | Not specified |
| Pitch | 188.739 | 189.094 |
| Minor | 187.873 | 188.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190 | Not specified |
| Pitch | 188.701 | 189.056 |
| Minor | 187.835 | 188.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190.038 | Not specified |
| Pitch | 188.739 | 189.189 |
| Minor | 187.873 | 188.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190 | Not specified |
| Pitch | 188.701 | 189.151 |
| Minor | 187.835 | 188.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 189.682 | 189.962 |
| Pitch | 188.451 | 188.663 |
| Root d3 | 187.219 | 187.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 189.682 | 189.962 |
| Pitch | 188.531 | 188.663 |
| Root d3 | 187.299 | 187.508 |
Cutting tap preparation
Pre-drill recommendation: 188 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 189.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.