M190 × 4 Metric Thread Dimensions
Nominal diameter 190 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 187.402 mm. Basic minor diameter: 185.67 mm. Basic major diameter: 190 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190 | Not specified |
| Pitch | 187.402 | 187.638 |
| Minor | 185.67 | 186.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190.06 | Not specified |
| Pitch | 187.462 | 187.762 |
| Minor | 185.73 | 186.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190 | Not specified |
| Pitch | 187.402 | 187.702 |
| Minor | 185.67 | 186.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190.06 | Not specified |
| Pitch | 187.462 | 187.837 |
| Minor | 185.73 | 186.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190 | Not specified |
| Pitch | 187.402 | 187.777 |
| Minor | 185.67 | 186.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190.06 | Not specified |
| Pitch | 187.462 | 187.937 |
| Minor | 185.73 | 186.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190 | Not specified |
| Pitch | 187.402 | 187.877 |
| Minor | 185.67 | 186.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190.06 | Not specified |
| Pitch | 187.462 | 188.062 |
| Minor | 185.73 | 186.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190 | Not specified |
| Pitch | 187.402 | 188.002 |
| Minor | 185.67 | 186.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 189.465 | 189.94 |
| Pitch | 187.062 | 187.342 |
| Root d3 | 184.598 | 185.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 189.465 | 189.94 |
| Pitch | 187.162 | 187.342 |
| Root d3 | 184.698 | 185.033 |
Cutting tap preparation
Pre-drill recommendation: 186 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 188.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.