M190 × 6 Metric Thread Dimensions
Nominal diameter 190 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 186.103 mm. Basic minor diameter: 183.505 mm. Basic major diameter: 190 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190 | Not specified |
| Pitch | 186.103 | 186.368 |
| Minor | 183.505 | 184.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190.08 | Not specified |
| Pitch | 186.183 | 186.518 |
| Minor | 183.585 | 184.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190 | Not specified |
| Pitch | 186.103 | 186.438 |
| Minor | 183.505 | 184.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190.08 | Not specified |
| Pitch | 186.183 | 186.608 |
| Minor | 183.585 | 184.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190 | Not specified |
| Pitch | 186.103 | 186.528 |
| Minor | 183.505 | 184.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190.08 | Not specified |
| Pitch | 186.183 | 186.713 |
| Minor | 183.585 | 184.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190 | Not specified |
| Pitch | 186.103 | 186.633 |
| Minor | 183.505 | 184.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190.08 | Not specified |
| Pitch | 186.183 | 186.853 |
| Minor | 183.585 | 184.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 190 | Not specified |
| Pitch | 186.103 | 186.773 |
| Minor | 183.505 | 184.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 189.32 | 189.92 |
| Pitch | 185.708 | 186.023 |
| Root d3 | 182.012 | 182.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 189.32 | 189.92 |
| Pitch | 185.823 | 186.023 |
| Root d3 | 182.127 | 182.559 |
Cutting tap preparation
Pre-drill recommendation: 184 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 187.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.