M180 × 8 Metric Thread Dimensions
Nominal diameter 180 mm; pitch 8 mm.
Basic geometry
Basic pitch diameter: 174.804 mm. Basic minor diameter: 171.34 mm. Basic major diameter: 180 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180 | Not specified |
| Pitch | 174.804 | 175.084 |
| Minor | 171.34 | 171.97 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180.1 | Not specified |
| Pitch | 174.904 | 175.259 |
| Minor | 171.44 | 172.24 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180 | Not specified |
| Pitch | 174.804 | 175.159 |
| Minor | 171.34 | 172.14 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180.1 | Not specified |
| Pitch | 174.904 | 175.354 |
| Minor | 171.44 | 172.44 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180 | Not specified |
| Pitch | 174.804 | 175.254 |
| Minor | 171.34 | 172.34 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180.1 | Not specified |
| Pitch | 174.904 | 175.464 |
| Minor | 171.44 | 172.69 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180 | Not specified |
| Pitch | 174.804 | 175.364 |
| Minor | 171.34 | 172.59 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180.1 | Not specified |
| Pitch | 174.904 | 175.614 |
| Minor | 171.44 | 173.04 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180 | Not specified |
| Pitch | 174.804 | 175.514 |
| Minor | 171.34 | 172.94 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 179.19 | 179.9 |
| Pitch | 174.369 | 174.704 |
| Root d3 | 169.441 | 170.085 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 179.19 | 179.9 |
| Pitch | 174.492 | 174.704 |
| Root d3 | 169.564 | 170.085 |
Cutting tap preparation
Pre-drill recommendation: 172 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 176.5 mm. Approximate formation model. Estimated formation: 64.3%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.