M180 × 2 Metric Thread Dimensions
Nominal diameter 180 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 178.701 mm. Basic minor diameter: 177.835 mm. Basic major diameter: 180 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180 | Not specified |
| Pitch | 178.701 | 178.861 |
| Minor | 177.835 | 178.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180.038 | Not specified |
| Pitch | 178.739 | 178.939 |
| Minor | 177.873 | 178.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180 | Not specified |
| Pitch | 178.701 | 178.901 |
| Minor | 177.835 | 178.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180.038 | Not specified |
| Pitch | 178.739 | 178.989 |
| Minor | 177.873 | 178.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180 | Not specified |
| Pitch | 178.701 | 178.951 |
| Minor | 177.835 | 178.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180.038 | Not specified |
| Pitch | 178.739 | 179.054 |
| Minor | 177.873 | 178.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180 | Not specified |
| Pitch | 178.701 | 179.016 |
| Minor | 177.835 | 178.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180.038 | Not specified |
| Pitch | 178.739 | 179.139 |
| Minor | 177.873 | 178.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180 | Not specified |
| Pitch | 178.701 | 179.101 |
| Minor | 177.835 | 178.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 179.682 | 179.962 |
| Pitch | 178.473 | 178.663 |
| Root d3 | 177.241 | 177.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 179.682 | 179.962 |
| Pitch | 178.545 | 178.663 |
| Root d3 | 177.313 | 177.508 |
Cutting tap preparation
Pre-drill recommendation: 178 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 179.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.