M180 × 6 Metric Thread Dimensions
Nominal diameter 180 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 176.103 mm. Basic minor diameter: 173.505 mm. Basic major diameter: 180 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180 | Not specified |
| Pitch | 176.103 | 176.353 |
| Minor | 173.505 | 174.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180.08 | Not specified |
| Pitch | 176.183 | 176.498 |
| Minor | 173.585 | 174.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180 | Not specified |
| Pitch | 176.103 | 176.418 |
| Minor | 173.505 | 174.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180.08 | Not specified |
| Pitch | 176.183 | 176.583 |
| Minor | 173.585 | 174.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180 | Not specified |
| Pitch | 176.103 | 176.503 |
| Minor | 173.505 | 174.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180.08 | Not specified |
| Pitch | 176.183 | 176.683 |
| Minor | 173.585 | 174.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180 | Not specified |
| Pitch | 176.103 | 176.603 |
| Minor | 173.505 | 174.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180.08 | Not specified |
| Pitch | 176.183 | 176.813 |
| Minor | 173.585 | 174.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180 | Not specified |
| Pitch | 176.103 | 176.733 |
| Minor | 173.505 | 174.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 179.32 | 179.92 |
| Pitch | 175.723 | 176.023 |
| Root d3 | 172.027 | 172.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 179.32 | 179.92 |
| Pitch | 175.833 | 176.023 |
| Root d3 | 172.137 | 172.559 |
Cutting tap preparation
Pre-drill recommendation: 174 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 177.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.