M180 × 3 Metric Thread Dimensions
Nominal diameter 180 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 178.051 mm. Basic minor diameter: 176.752 mm. Basic major diameter: 180 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180 | Not specified |
| Pitch | 178.051 | 178.241 |
| Minor | 176.752 | 177.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180.048 | Not specified |
| Pitch | 178.099 | 178.335 |
| Minor | 176.8 | 177.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180 | Not specified |
| Pitch | 178.051 | 178.287 |
| Minor | 176.752 | 177.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180.048 | Not specified |
| Pitch | 178.099 | 178.399 |
| Minor | 176.8 | 177.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180 | Not specified |
| Pitch | 178.051 | 178.351 |
| Minor | 176.752 | 177.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180.048 | Not specified |
| Pitch | 178.099 | 178.474 |
| Minor | 176.8 | 177.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180 | Not specified |
| Pitch | 178.051 | 178.426 |
| Minor | 176.752 | 177.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180.048 | Not specified |
| Pitch | 178.099 | 178.574 |
| Minor | 176.8 | 177.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180 | Not specified |
| Pitch | 178.051 | 178.526 |
| Minor | 176.752 | 177.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 179.577 | 179.952 |
| Pitch | 177.779 | 178.003 |
| Root d3 | 175.931 | 176.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 179.577 | 179.952 |
| Pitch | 177.863 | 178.003 |
| Root d3 | 176.015 | 176.271 |
Cutting tap preparation
Pre-drill recommendation: 177 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 178.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.