M180 × 4 Metric Thread Dimensions
Nominal diameter 180 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 177.402 mm. Basic minor diameter: 175.67 mm. Basic major diameter: 180 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180 | Not specified |
| Pitch | 177.402 | 177.614 |
| Minor | 175.67 | 176.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180.06 | Not specified |
| Pitch | 177.462 | 177.727 |
| Minor | 175.73 | 176.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180 | Not specified |
| Pitch | 177.402 | 177.667 |
| Minor | 175.67 | 176.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180.06 | Not specified |
| Pitch | 177.462 | 177.797 |
| Minor | 175.73 | 176.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180 | Not specified |
| Pitch | 177.402 | 177.737 |
| Minor | 175.67 | 176.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180.06 | Not specified |
| Pitch | 177.462 | 177.887 |
| Minor | 175.73 | 176.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180 | Not specified |
| Pitch | 177.402 | 177.827 |
| Minor | 175.67 | 176.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180.06 | Not specified |
| Pitch | 177.462 | 177.992 |
| Minor | 175.73 | 176.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 180 | Not specified |
| Pitch | 177.402 | 177.932 |
| Minor | 175.67 | 176.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 179.465 | 179.94 |
| Pitch | 177.092 | 177.342 |
| Root d3 | 174.628 | 175.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 179.465 | 179.94 |
| Pitch | 177.182 | 177.342 |
| Root d3 | 174.718 | 175.033 |
Cutting tap preparation
Pre-drill recommendation: 176 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 178.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.