M170 × 8 Metric Thread Dimensions
Nominal diameter 170 mm; pitch 8 mm.
Basic geometry
Basic pitch diameter: 164.804 mm. Basic minor diameter: 161.34 mm. Basic major diameter: 170 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170 | Not specified |
| Pitch | 164.804 | 165.084 |
| Minor | 161.34 | 161.97 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170.1 | Not specified |
| Pitch | 164.904 | 165.259 |
| Minor | 161.44 | 162.24 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170 | Not specified |
| Pitch | 164.804 | 165.159 |
| Minor | 161.34 | 162.14 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170.1 | Not specified |
| Pitch | 164.904 | 165.354 |
| Minor | 161.44 | 162.44 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170 | Not specified |
| Pitch | 164.804 | 165.254 |
| Minor | 161.34 | 162.34 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170.1 | Not specified |
| Pitch | 164.904 | 165.464 |
| Minor | 161.44 | 162.69 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170 | Not specified |
| Pitch | 164.804 | 165.364 |
| Minor | 161.34 | 162.59 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170.1 | Not specified |
| Pitch | 164.904 | 165.614 |
| Minor | 161.44 | 163.04 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170 | Not specified |
| Pitch | 164.804 | 165.514 |
| Minor | 161.34 | 162.94 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 169.19 | 169.9 |
| Pitch | 164.369 | 164.704 |
| Root d3 | 159.441 | 160.085 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 169.19 | 169.9 |
| Pitch | 164.492 | 164.704 |
| Root d3 | 159.564 | 160.085 |
Cutting tap preparation
Pre-drill recommendation: 162 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 166.5 mm. Approximate formation model. Estimated formation: 64.3%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.