M170 × 3 Metric Thread Dimensions
Nominal diameter 170 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 168.051 mm. Basic minor diameter: 166.752 mm. Basic major diameter: 170 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170 | Not specified |
| Pitch | 168.051 | 168.241 |
| Minor | 166.752 | 167.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170.048 | Not specified |
| Pitch | 168.099 | 168.335 |
| Minor | 166.8 | 167.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170 | Not specified |
| Pitch | 168.051 | 168.287 |
| Minor | 166.752 | 167.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170.048 | Not specified |
| Pitch | 168.099 | 168.399 |
| Minor | 166.8 | 167.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170 | Not specified |
| Pitch | 168.051 | 168.351 |
| Minor | 166.752 | 167.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170.048 | Not specified |
| Pitch | 168.099 | 168.474 |
| Minor | 166.8 | 167.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170 | Not specified |
| Pitch | 168.051 | 168.426 |
| Minor | 166.752 | 167.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170.048 | Not specified |
| Pitch | 168.099 | 168.574 |
| Minor | 166.8 | 167.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170 | Not specified |
| Pitch | 168.051 | 168.526 |
| Minor | 166.752 | 167.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 169.577 | 169.952 |
| Pitch | 167.779 | 168.003 |
| Root d3 | 165.931 | 166.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 169.577 | 169.952 |
| Pitch | 167.863 | 168.003 |
| Root d3 | 166.015 | 166.271 |
Cutting tap preparation
Pre-drill recommendation: 167 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 168.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.