M170 × 6 Metric Thread Dimensions
Nominal diameter 170 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 166.103 mm. Basic minor diameter: 163.505 mm. Basic major diameter: 170 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170 | Not specified |
| Pitch | 166.103 | 166.353 |
| Minor | 163.505 | 164.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170.08 | Not specified |
| Pitch | 166.183 | 166.498 |
| Minor | 163.585 | 164.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170 | Not specified |
| Pitch | 166.103 | 166.418 |
| Minor | 163.505 | 164.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170.08 | Not specified |
| Pitch | 166.183 | 166.583 |
| Minor | 163.585 | 164.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170 | Not specified |
| Pitch | 166.103 | 166.503 |
| Minor | 163.505 | 164.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170.08 | Not specified |
| Pitch | 166.183 | 166.683 |
| Minor | 163.585 | 164.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170 | Not specified |
| Pitch | 166.103 | 166.603 |
| Minor | 163.505 | 164.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170.08 | Not specified |
| Pitch | 166.183 | 166.813 |
| Minor | 163.585 | 164.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170 | Not specified |
| Pitch | 166.103 | 166.733 |
| Minor | 163.505 | 164.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 169.32 | 169.92 |
| Pitch | 165.723 | 166.023 |
| Root d3 | 162.027 | 162.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 169.32 | 169.92 |
| Pitch | 165.833 | 166.023 |
| Root d3 | 162.137 | 162.559 |
Cutting tap preparation
Pre-drill recommendation: 164 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 167.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.