M170 × 4 Metric Thread Dimensions
Nominal diameter 170 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 167.402 mm. Basic minor diameter: 165.67 mm. Basic major diameter: 170 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170 | Not specified |
| Pitch | 167.402 | 167.614 |
| Minor | 165.67 | 166.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170.06 | Not specified |
| Pitch | 167.462 | 167.727 |
| Minor | 165.73 | 166.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170 | Not specified |
| Pitch | 167.402 | 167.667 |
| Minor | 165.67 | 166.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170.06 | Not specified |
| Pitch | 167.462 | 167.797 |
| Minor | 165.73 | 166.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170 | Not specified |
| Pitch | 167.402 | 167.737 |
| Minor | 165.67 | 166.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170.06 | Not specified |
| Pitch | 167.462 | 167.887 |
| Minor | 165.73 | 166.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170 | Not specified |
| Pitch | 167.402 | 167.827 |
| Minor | 165.67 | 166.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170.06 | Not specified |
| Pitch | 167.462 | 167.992 |
| Minor | 165.73 | 166.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170 | Not specified |
| Pitch | 167.402 | 167.932 |
| Minor | 165.67 | 166.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 169.465 | 169.94 |
| Pitch | 167.092 | 167.342 |
| Root d3 | 164.628 | 165.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 169.465 | 169.94 |
| Pitch | 167.182 | 167.342 |
| Root d3 | 164.718 | 165.033 |
Cutting tap preparation
Pre-drill recommendation: 166 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 168.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.