M170 × 2 Metric Thread Dimensions
Nominal diameter 170 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 168.701 mm. Basic minor diameter: 167.835 mm. Basic major diameter: 170 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170 | Not specified |
| Pitch | 168.701 | 168.861 |
| Minor | 167.835 | 168.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170.038 | Not specified |
| Pitch | 168.739 | 168.939 |
| Minor | 167.873 | 168.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170 | Not specified |
| Pitch | 168.701 | 168.901 |
| Minor | 167.835 | 168.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170.038 | Not specified |
| Pitch | 168.739 | 168.989 |
| Minor | 167.873 | 168.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170 | Not specified |
| Pitch | 168.701 | 168.951 |
| Minor | 167.835 | 168.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170.038 | Not specified |
| Pitch | 168.739 | 169.054 |
| Minor | 167.873 | 168.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170 | Not specified |
| Pitch | 168.701 | 169.016 |
| Minor | 167.835 | 168.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170.038 | Not specified |
| Pitch | 168.739 | 169.139 |
| Minor | 167.873 | 168.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 170 | Not specified |
| Pitch | 168.701 | 169.101 |
| Minor | 167.835 | 168.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 169.682 | 169.962 |
| Pitch | 168.473 | 168.663 |
| Root d3 | 167.241 | 167.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 169.682 | 169.962 |
| Pitch | 168.545 | 168.663 |
| Root d3 | 167.313 | 167.508 |
Cutting tap preparation
Pre-drill recommendation: 168 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 169.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.