M160 × 8 Metric Thread Dimensions
Nominal diameter 160 mm; pitch 8 mm.
Basic geometry
Basic pitch diameter: 154.804 mm. Basic minor diameter: 151.34 mm. Basic major diameter: 160 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160 | Not specified |
| Pitch | 154.804 | 155.084 |
| Minor | 151.34 | 151.97 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160.1 | Not specified |
| Pitch | 154.904 | 155.259 |
| Minor | 151.44 | 152.24 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160 | Not specified |
| Pitch | 154.804 | 155.159 |
| Minor | 151.34 | 152.14 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160.1 | Not specified |
| Pitch | 154.904 | 155.354 |
| Minor | 151.44 | 152.44 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160 | Not specified |
| Pitch | 154.804 | 155.254 |
| Minor | 151.34 | 152.34 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160.1 | Not specified |
| Pitch | 154.904 | 155.464 |
| Minor | 151.44 | 152.69 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160 | Not specified |
| Pitch | 154.804 | 155.364 |
| Minor | 151.34 | 152.59 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160.1 | Not specified |
| Pitch | 154.904 | 155.614 |
| Minor | 151.44 | 153.04 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160 | Not specified |
| Pitch | 154.804 | 155.514 |
| Minor | 151.34 | 152.94 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 159.19 | 159.9 |
| Pitch | 154.369 | 154.704 |
| Root d3 | 149.441 | 150.085 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 159.19 | 159.9 |
| Pitch | 154.492 | 154.704 |
| Root d3 | 149.564 | 150.085 |
Cutting tap preparation
Pre-drill recommendation: 152 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 156.5 mm. Approximate formation model. Estimated formation: 64.3%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.