M160 × 3 Metric Thread Dimensions
Nominal diameter 160 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 158.051 mm. Basic minor diameter: 156.752 mm. Basic major diameter: 160 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160 | Not specified |
| Pitch | 158.051 | 158.241 |
| Minor | 156.752 | 157.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160.048 | Not specified |
| Pitch | 158.099 | 158.335 |
| Minor | 156.8 | 157.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160 | Not specified |
| Pitch | 158.051 | 158.287 |
| Minor | 156.752 | 157.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160.048 | Not specified |
| Pitch | 158.099 | 158.399 |
| Minor | 156.8 | 157.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160 | Not specified |
| Pitch | 158.051 | 158.351 |
| Minor | 156.752 | 157.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160.048 | Not specified |
| Pitch | 158.099 | 158.474 |
| Minor | 156.8 | 157.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160 | Not specified |
| Pitch | 158.051 | 158.426 |
| Minor | 156.752 | 157.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160.048 | Not specified |
| Pitch | 158.099 | 158.574 |
| Minor | 156.8 | 157.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160 | Not specified |
| Pitch | 158.051 | 158.526 |
| Minor | 156.752 | 157.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 159.577 | 159.952 |
| Pitch | 157.779 | 158.003 |
| Root d3 | 155.931 | 156.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 159.577 | 159.952 |
| Pitch | 157.863 | 158.003 |
| Root d3 | 156.015 | 156.271 |
Cutting tap preparation
Pre-drill recommendation: 157 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 158.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.