M160 × 6 Metric Thread Dimensions
Nominal diameter 160 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 156.103 mm. Basic minor diameter: 153.505 mm. Basic major diameter: 160 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160 | Not specified |
| Pitch | 156.103 | 156.353 |
| Minor | 153.505 | 154.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160.08 | Not specified |
| Pitch | 156.183 | 156.498 |
| Minor | 153.585 | 154.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160 | Not specified |
| Pitch | 156.103 | 156.418 |
| Minor | 153.505 | 154.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160.08 | Not specified |
| Pitch | 156.183 | 156.583 |
| Minor | 153.585 | 154.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160 | Not specified |
| Pitch | 156.103 | 156.503 |
| Minor | 153.505 | 154.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160.08 | Not specified |
| Pitch | 156.183 | 156.683 |
| Minor | 153.585 | 154.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160 | Not specified |
| Pitch | 156.103 | 156.603 |
| Minor | 153.505 | 154.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160.08 | Not specified |
| Pitch | 156.183 | 156.813 |
| Minor | 153.585 | 154.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160 | Not specified |
| Pitch | 156.103 | 156.733 |
| Minor | 153.505 | 154.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 159.32 | 159.92 |
| Pitch | 155.723 | 156.023 |
| Root d3 | 152.027 | 152.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 159.32 | 159.92 |
| Pitch | 155.833 | 156.023 |
| Root d3 | 152.137 | 152.559 |
Cutting tap preparation
Pre-drill recommendation: 154 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 157.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.