M160 × 4 Metric Thread Dimensions
Nominal diameter 160 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 157.402 mm. Basic minor diameter: 155.67 mm. Basic major diameter: 160 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160 | Not specified |
| Pitch | 157.402 | 157.614 |
| Minor | 155.67 | 156.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160.06 | Not specified |
| Pitch | 157.462 | 157.727 |
| Minor | 155.73 | 156.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160 | Not specified |
| Pitch | 157.402 | 157.667 |
| Minor | 155.67 | 156.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160.06 | Not specified |
| Pitch | 157.462 | 157.797 |
| Minor | 155.73 | 156.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160 | Not specified |
| Pitch | 157.402 | 157.737 |
| Minor | 155.67 | 156.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160.06 | Not specified |
| Pitch | 157.462 | 157.887 |
| Minor | 155.73 | 156.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160 | Not specified |
| Pitch | 157.402 | 157.827 |
| Minor | 155.67 | 156.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160.06 | Not specified |
| Pitch | 157.462 | 157.992 |
| Minor | 155.73 | 156.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160 | Not specified |
| Pitch | 157.402 | 157.932 |
| Minor | 155.67 | 156.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 159.465 | 159.94 |
| Pitch | 157.092 | 157.342 |
| Root d3 | 154.628 | 155.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 159.465 | 159.94 |
| Pitch | 157.182 | 157.342 |
| Root d3 | 154.718 | 155.033 |
Cutting tap preparation
Pre-drill recommendation: 156 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 158.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.