M160 × 2 Metric Thread Dimensions
Nominal diameter 160 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 158.701 mm. Basic minor diameter: 157.835 mm. Basic major diameter: 160 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160 | Not specified |
| Pitch | 158.701 | 158.861 |
| Minor | 157.835 | 158.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160.038 | Not specified |
| Pitch | 158.739 | 158.939 |
| Minor | 157.873 | 158.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160 | Not specified |
| Pitch | 158.701 | 158.901 |
| Minor | 157.835 | 158.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160.038 | Not specified |
| Pitch | 158.739 | 158.989 |
| Minor | 157.873 | 158.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160 | Not specified |
| Pitch | 158.701 | 158.951 |
| Minor | 157.835 | 158.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160.038 | Not specified |
| Pitch | 158.739 | 159.054 |
| Minor | 157.873 | 158.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160 | Not specified |
| Pitch | 158.701 | 159.016 |
| Minor | 157.835 | 158.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160.038 | Not specified |
| Pitch | 158.739 | 159.139 |
| Minor | 157.873 | 158.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 160 | Not specified |
| Pitch | 158.701 | 159.101 |
| Minor | 157.835 | 158.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 159.682 | 159.962 |
| Pitch | 158.473 | 158.663 |
| Root d3 | 157.241 | 157.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 159.682 | 159.962 |
| Pitch | 158.545 | 158.663 |
| Root d3 | 157.313 | 157.508 |
Cutting tap preparation
Pre-drill recommendation: 158 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 159.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.