M150 × 8 Metric Thread Dimensions
Nominal diameter 150 mm; pitch 8 mm.
Basic geometry
Basic pitch diameter: 144.804 mm. Basic minor diameter: 141.34 mm. Basic major diameter: 150 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150 | Not specified |
| Pitch | 144.804 | 145.084 |
| Minor | 141.34 | 141.97 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150.1 | Not specified |
| Pitch | 144.904 | 145.259 |
| Minor | 141.44 | 142.24 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150 | Not specified |
| Pitch | 144.804 | 145.159 |
| Minor | 141.34 | 142.14 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150.1 | Not specified |
| Pitch | 144.904 | 145.354 |
| Minor | 141.44 | 142.44 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150 | Not specified |
| Pitch | 144.804 | 145.254 |
| Minor | 141.34 | 142.34 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150.1 | Not specified |
| Pitch | 144.904 | 145.464 |
| Minor | 141.44 | 142.69 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150 | Not specified |
| Pitch | 144.804 | 145.364 |
| Minor | 141.34 | 142.59 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150.1 | Not specified |
| Pitch | 144.904 | 145.614 |
| Minor | 141.44 | 143.04 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150 | Not specified |
| Pitch | 144.804 | 145.514 |
| Minor | 141.34 | 142.94 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 149.19 | 149.9 |
| Pitch | 144.369 | 144.704 |
| Root d3 | 139.441 | 140.085 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 149.19 | 149.9 |
| Pitch | 144.492 | 144.704 |
| Root d3 | 139.564 | 140.085 |
Cutting tap preparation
Pre-drill recommendation: 142 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 146.5 mm. Approximate formation model. Estimated formation: 64.3%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.