M150 × 1.5 Metric Thread Dimensions
Nominal diameter 150 mm; pitch 1.5 mm.
Basic geometry
Basic pitch diameter: 149.026 mm. Basic minor diameter: 148.376 mm. Basic major diameter: 150 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150 | Not specified |
| Pitch | 149.026 | 149.166 |
| Minor | 148.376 | 148.566 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150.032 | Not specified |
| Pitch | 149.058 | 149.238 |
| Minor | 148.408 | 148.644 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150 | Not specified |
| Pitch | 149.026 | 149.206 |
| Minor | 148.376 | 148.612 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150.032 | Not specified |
| Pitch | 149.058 | 149.282 |
| Minor | 148.408 | 148.708 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150 | Not specified |
| Pitch | 149.026 | 149.25 |
| Minor | 148.376 | 148.676 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150.032 | Not specified |
| Pitch | 149.058 | 149.338 |
| Minor | 148.408 | 148.783 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150 | Not specified |
| Pitch | 149.026 | 149.306 |
| Minor | 148.376 | 148.751 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150.032 | Not specified |
| Pitch | 149.058 | 149.413 |
| Minor | 148.408 | 148.883 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150 | Not specified |
| Pitch | 149.026 | 149.381 |
| Minor | 148.376 | 148.851 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 149.732 | 149.968 |
| Pitch | 148.824 | 148.994 |
| Root d3 | 147.9 | 148.128 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 149.732 | 149.968 |
| Pitch | 148.888 | 148.994 |
| Root d3 | 147.964 | 148.128 |
Cutting tap preparation
Pre-drill recommendation: 148.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 149.3 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.