M150 × 3 Metric Thread Dimensions
Nominal diameter 150 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 148.051 mm. Basic minor diameter: 146.752 mm. Basic major diameter: 150 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150 | Not specified |
| Pitch | 148.051 | 148.241 |
| Minor | 146.752 | 147.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150.048 | Not specified |
| Pitch | 148.099 | 148.335 |
| Minor | 146.8 | 147.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150 | Not specified |
| Pitch | 148.051 | 148.287 |
| Minor | 146.752 | 147.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150.048 | Not specified |
| Pitch | 148.099 | 148.399 |
| Minor | 146.8 | 147.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150 | Not specified |
| Pitch | 148.051 | 148.351 |
| Minor | 146.752 | 147.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150.048 | Not specified |
| Pitch | 148.099 | 148.474 |
| Minor | 146.8 | 147.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150 | Not specified |
| Pitch | 148.051 | 148.426 |
| Minor | 146.752 | 147.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150.048 | Not specified |
| Pitch | 148.099 | 148.574 |
| Minor | 146.8 | 147.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150 | Not specified |
| Pitch | 148.051 | 148.526 |
| Minor | 146.752 | 147.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 149.577 | 149.952 |
| Pitch | 147.779 | 148.003 |
| Root d3 | 145.931 | 146.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 149.577 | 149.952 |
| Pitch | 147.863 | 148.003 |
| Root d3 | 146.015 | 146.271 |
Cutting tap preparation
Pre-drill recommendation: 147 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 148.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.