M150 × 2 Metric Thread Dimensions
Nominal diameter 150 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 148.701 mm. Basic minor diameter: 147.835 mm. Basic major diameter: 150 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150 | Not specified |
| Pitch | 148.701 | 148.861 |
| Minor | 147.835 | 148.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150.038 | Not specified |
| Pitch | 148.739 | 148.939 |
| Minor | 147.873 | 148.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150 | Not specified |
| Pitch | 148.701 | 148.901 |
| Minor | 147.835 | 148.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150.038 | Not specified |
| Pitch | 148.739 | 148.989 |
| Minor | 147.873 | 148.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150 | Not specified |
| Pitch | 148.701 | 148.951 |
| Minor | 147.835 | 148.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150.038 | Not specified |
| Pitch | 148.739 | 149.054 |
| Minor | 147.873 | 148.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150 | Not specified |
| Pitch | 148.701 | 149.016 |
| Minor | 147.835 | 148.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150.038 | Not specified |
| Pitch | 148.739 | 149.139 |
| Minor | 147.873 | 148.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150 | Not specified |
| Pitch | 148.701 | 149.101 |
| Minor | 147.835 | 148.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 149.682 | 149.962 |
| Pitch | 148.473 | 148.663 |
| Root d3 | 147.241 | 147.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 149.682 | 149.962 |
| Pitch | 148.545 | 148.663 |
| Root d3 | 147.313 | 147.508 |
Cutting tap preparation
Pre-drill recommendation: 148 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 149.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.