M150 × 6 Metric Thread Dimensions
Nominal diameter 150 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 146.103 mm. Basic minor diameter: 143.505 mm. Basic major diameter: 150 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150 | Not specified |
| Pitch | 146.103 | 146.353 |
| Minor | 143.505 | 144.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150.08 | Not specified |
| Pitch | 146.183 | 146.498 |
| Minor | 143.585 | 144.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150 | Not specified |
| Pitch | 146.103 | 146.418 |
| Minor | 143.505 | 144.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150.08 | Not specified |
| Pitch | 146.183 | 146.583 |
| Minor | 143.585 | 144.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150 | Not specified |
| Pitch | 146.103 | 146.503 |
| Minor | 143.505 | 144.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150.08 | Not specified |
| Pitch | 146.183 | 146.683 |
| Minor | 143.585 | 144.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150 | Not specified |
| Pitch | 146.103 | 146.603 |
| Minor | 143.505 | 144.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150.08 | Not specified |
| Pitch | 146.183 | 146.813 |
| Minor | 143.585 | 144.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 150 | Not specified |
| Pitch | 146.103 | 146.733 |
| Minor | 143.505 | 144.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 149.32 | 149.92 |
| Pitch | 145.723 | 146.023 |
| Root d3 | 142.027 | 142.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 149.32 | 149.92 |
| Pitch | 145.833 | 146.023 |
| Root d3 | 142.137 | 142.559 |
Cutting tap preparation
Pre-drill recommendation: 144 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 147.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.