M14 × 1.5 Metric Thread Dimensions
Nominal diameter 14 mm; pitch 1.5 mm.
Basic geometry
Basic pitch diameter: 13.026 mm. Basic minor diameter: 12.376 mm. Basic major diameter: 14 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14 | Not specified |
| Pitch | 13.026 | 13.144 |
| Minor | 12.376 | 12.566 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14.032 | Not specified |
| Pitch | 13.058 | 13.208 |
| Minor | 12.408 | 12.644 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14 | Not specified |
| Pitch | 13.026 | 13.176 |
| Minor | 12.376 | 12.612 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14.032 | Not specified |
| Pitch | 13.058 | 13.248 |
| Minor | 12.408 | 12.708 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14 | Not specified |
| Pitch | 13.026 | 13.216 |
| Minor | 12.376 | 12.676 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14.032 | Not specified |
| Pitch | 13.058 | 13.294 |
| Minor | 12.408 | 12.783 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14 | Not specified |
| Pitch | 13.026 | 13.262 |
| Minor | 12.376 | 12.751 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14.032 | Not specified |
| Pitch | 13.058 | 13.358 |
| Minor | 12.408 | 12.883 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14 | Not specified |
| Pitch | 13.026 | 13.326 |
| Minor | 12.376 | 12.851 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 13.732 | 13.968 |
| Pitch | 12.854 | 12.994 |
| Root d3 | 11.93 | 12.128 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 13.732 | 13.968 |
| Pitch | 12.904 | 12.994 |
| Root d3 | 11.98 | 12.128 |
Cutting tap preparation
Pre-drill recommendation: 12.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 13.3 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.