M14 × 1 Metric Thread Dimensions
Nominal diameter 14 mm; pitch 1 mm.
Basic geometry
Basic pitch diameter: 13.35 mm. Basic minor diameter: 12.917 mm. Basic major diameter: 14 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14 | Not specified |
| Pitch | 13.35 | 13.45 |
| Minor | 12.917 | 13.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14.026 | Not specified |
| Pitch | 13.376 | 13.501 |
| Minor | 12.943 | 13.133 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14 | Not specified |
| Pitch | 13.35 | 13.475 |
| Minor | 12.917 | 13.107 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14.026 | Not specified |
| Pitch | 13.376 | 13.536 |
| Minor | 12.943 | 13.179 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14 | Not specified |
| Pitch | 13.35 | 13.51 |
| Minor | 12.917 | 13.153 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14.026 | Not specified |
| Pitch | 13.376 | 13.576 |
| Minor | 12.943 | 13.243 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14 | Not specified |
| Pitch | 13.35 | 13.55 |
| Minor | 12.917 | 13.217 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14.026 | Not specified |
| Pitch | 13.376 | 13.626 |
| Minor | 12.943 | 13.318 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14 | Not specified |
| Pitch | 13.35 | 13.6 |
| Minor | 12.917 | 13.292 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 13.794 | 13.974 |
| Pitch | 13.206 | 13.324 |
| Root d3 | 12.59 | 12.747 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 13.794 | 13.974 |
| Pitch | 13.249 | 13.324 |
| Root d3 | 12.633 | 12.747 |
Cutting tap preparation
Pre-drill recommendation: 13 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 13.55 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.