M14 × 0.5 Metric Thread Dimensions
Nominal diameter 14 mm; pitch 0.5 mm.
Basic geometry
Basic pitch diameter: 13.675 mm. Basic minor diameter: 13.459 mm. Basic major diameter: 14 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14 | Not specified |
| Pitch | 13.675 | 13.75 |
| Minor | 13.459 | 13.549 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14.02 | Not specified |
| Pitch | 13.695 | 13.79 |
| Minor | 13.479 | 13.591 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14 | Not specified |
| Pitch | 13.675 | 13.77 |
| Minor | 13.459 | 13.571 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14.02 | Not specified |
| Pitch | 13.695 | 13.813 |
| Minor | 13.479 | 13.619 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14 | Not specified |
| Pitch | 13.675 | 13.793 |
| Minor | 13.459 | 13.599 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 13.874 | 13.98 |
| Pitch | 13.565 | 13.655 |
| Root d3 | 13.257 | 13.367 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 13.874 | 13.98 |
| Pitch | 13.599 | 13.655 |
| Root d3 | 13.291 | 13.367 |
Cutting tap preparation
Pre-drill recommendation: 13.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 13.78 mm. Approximate formation model. Estimated formation: 64.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.