M14 × 0.75 Metric Thread Dimensions
Nominal diameter 14 mm; pitch 0.75 mm.
Basic geometry
Basic pitch diameter: 13.513 mm. Basic minor diameter: 13.188 mm. Basic major diameter: 14 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14 | Not specified |
| Pitch | 13.513 | 13.603 |
| Minor | 13.188 | 13.306 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14.022 | Not specified |
| Pitch | 13.535 | 13.647 |
| Minor | 13.21 | 13.36 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14 | Not specified |
| Pitch | 13.513 | 13.625 |
| Minor | 13.188 | 13.338 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14.022 | Not specified |
| Pitch | 13.535 | 13.675 |
| Minor | 13.21 | 13.4 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14 | Not specified |
| Pitch | 13.513 | 13.653 |
| Minor | 13.188 | 13.378 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14.022 | Not specified |
| Pitch | 13.535 | 13.715 |
| Minor | 13.21 | 13.446 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14 | Not specified |
| Pitch | 13.513 | 13.693 |
| Minor | 13.188 | 13.424 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 13.838 | 13.978 |
| Pitch | 13.385 | 13.491 |
| Root d3 | 12.923 | 13.058 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 13.838 | 13.978 |
| Pitch | 13.424 | 13.491 |
| Root d3 | 12.962 | 13.058 |
Cutting tap preparation
Pre-drill recommendation: 13.25 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 13.65 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.