M14 × 1.25 Metric Thread Dimensions
Nominal diameter 14 mm; pitch 1.25 mm.
Basic geometry
Basic pitch diameter: 13.188 mm. Basic minor diameter: 12.647 mm. Basic major diameter: 14 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14 | Not specified |
| Pitch | 13.188 | 13.3 |
| Minor | 12.647 | 12.817 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14.028 | Not specified |
| Pitch | 13.216 | 13.356 |
| Minor | 12.675 | 12.887 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14 | Not specified |
| Pitch | 13.188 | 13.328 |
| Minor | 12.647 | 12.859 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14.028 | Not specified |
| Pitch | 13.216 | 13.396 |
| Minor | 12.675 | 12.94 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14 | Not specified |
| Pitch | 13.188 | 13.368 |
| Minor | 12.647 | 12.912 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14.028 | Not specified |
| Pitch | 13.216 | 13.44 |
| Minor | 12.675 | 13.01 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14 | Not specified |
| Pitch | 13.188 | 13.412 |
| Minor | 12.647 | 12.982 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14.028 | Not specified |
| Pitch | 13.216 | 13.496 |
| Minor | 12.675 | 13.1 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14 | Not specified |
| Pitch | 13.188 | 13.468 |
| Minor | 12.647 | 13.072 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 13.76 | 13.972 |
| Pitch | 13.028 | 13.16 |
| Root d3 | 12.258 | 12.438 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 13.76 | 13.972 |
| Pitch | 13.075 | 13.16 |
| Root d3 | 12.305 | 12.438 |
Cutting tap preparation
Pre-drill recommendation: 12.75 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 13.45 mm. Approximate formation model. Estimated formation: 64.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.