M130 × 8 Metric Thread Dimensions
Nominal diameter 130 mm; pitch 8 mm.
Basic geometry
Basic pitch diameter: 124.804 mm. Basic minor diameter: 121.34 mm. Basic major diameter: 130 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130 | Not specified |
| Pitch | 124.804 | 125.084 |
| Minor | 121.34 | 121.97 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130.1 | Not specified |
| Pitch | 124.904 | 125.259 |
| Minor | 121.44 | 122.24 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130 | Not specified |
| Pitch | 124.804 | 125.159 |
| Minor | 121.34 | 122.14 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130.1 | Not specified |
| Pitch | 124.904 | 125.354 |
| Minor | 121.44 | 122.44 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130 | Not specified |
| Pitch | 124.804 | 125.254 |
| Minor | 121.34 | 122.34 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130.1 | Not specified |
| Pitch | 124.904 | 125.464 |
| Minor | 121.44 | 122.69 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130 | Not specified |
| Pitch | 124.804 | 125.364 |
| Minor | 121.34 | 122.59 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130.1 | Not specified |
| Pitch | 124.904 | 125.614 |
| Minor | 121.44 | 123.04 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130 | Not specified |
| Pitch | 124.804 | 125.514 |
| Minor | 121.34 | 122.94 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 129.19 | 129.9 |
| Pitch | 124.369 | 124.704 |
| Root d3 | 119.441 | 120.085 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 129.19 | 129.9 |
| Pitch | 124.492 | 124.704 |
| Root d3 | 119.564 | 120.085 |
Cutting tap preparation
Pre-drill recommendation: 122 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 126.5 mm. Approximate formation model. Estimated formation: 64.3%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.