M130 × 3 Metric Thread Dimensions
Nominal diameter 130 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 128.051 mm. Basic minor diameter: 126.752 mm. Basic major diameter: 130 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130 | Not specified |
| Pitch | 128.051 | 128.241 |
| Minor | 126.752 | 127.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130.048 | Not specified |
| Pitch | 128.099 | 128.335 |
| Minor | 126.8 | 127.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130 | Not specified |
| Pitch | 128.051 | 128.287 |
| Minor | 126.752 | 127.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130.048 | Not specified |
| Pitch | 128.099 | 128.399 |
| Minor | 126.8 | 127.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130 | Not specified |
| Pitch | 128.051 | 128.351 |
| Minor | 126.752 | 127.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130.048 | Not specified |
| Pitch | 128.099 | 128.474 |
| Minor | 126.8 | 127.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130 | Not specified |
| Pitch | 128.051 | 128.426 |
| Minor | 126.752 | 127.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130.048 | Not specified |
| Pitch | 128.099 | 128.574 |
| Minor | 126.8 | 127.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130 | Not specified |
| Pitch | 128.051 | 128.526 |
| Minor | 126.752 | 127.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 129.577 | 129.952 |
| Pitch | 127.779 | 128.003 |
| Root d3 | 125.931 | 126.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 129.577 | 129.952 |
| Pitch | 127.863 | 128.003 |
| Root d3 | 126.015 | 126.271 |
Cutting tap preparation
Pre-drill recommendation: 127 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 128.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.