M130 × 6 Metric Thread Dimensions
Nominal diameter 130 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 126.103 mm. Basic minor diameter: 123.505 mm. Basic major diameter: 130 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130 | Not specified |
| Pitch | 126.103 | 126.353 |
| Minor | 123.505 | 124.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130.08 | Not specified |
| Pitch | 126.183 | 126.498 |
| Minor | 123.585 | 124.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130 | Not specified |
| Pitch | 126.103 | 126.418 |
| Minor | 123.505 | 124.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130.08 | Not specified |
| Pitch | 126.183 | 126.583 |
| Minor | 123.585 | 124.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130 | Not specified |
| Pitch | 126.103 | 126.503 |
| Minor | 123.505 | 124.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130.08 | Not specified |
| Pitch | 126.183 | 126.683 |
| Minor | 123.585 | 124.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130 | Not specified |
| Pitch | 126.103 | 126.603 |
| Minor | 123.505 | 124.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130.08 | Not specified |
| Pitch | 126.183 | 126.813 |
| Minor | 123.585 | 124.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130 | Not specified |
| Pitch | 126.103 | 126.733 |
| Minor | 123.505 | 124.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 129.32 | 129.92 |
| Pitch | 125.723 | 126.023 |
| Root d3 | 122.027 | 122.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 129.32 | 129.92 |
| Pitch | 125.833 | 126.023 |
| Root d3 | 122.137 | 122.559 |
Cutting tap preparation
Pre-drill recommendation: 124 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 127.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.