M130 × 1.5 Metric Thread Dimensions
Nominal diameter 130 mm; pitch 1.5 mm.
Basic geometry
Basic pitch diameter: 129.026 mm. Basic minor diameter: 128.376 mm. Basic major diameter: 130 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130 | Not specified |
| Pitch | 129.026 | 129.166 |
| Minor | 128.376 | 128.566 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130.032 | Not specified |
| Pitch | 129.058 | 129.238 |
| Minor | 128.408 | 128.644 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130 | Not specified |
| Pitch | 129.026 | 129.206 |
| Minor | 128.376 | 128.612 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130.032 | Not specified |
| Pitch | 129.058 | 129.282 |
| Minor | 128.408 | 128.708 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130 | Not specified |
| Pitch | 129.026 | 129.25 |
| Minor | 128.376 | 128.676 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130.032 | Not specified |
| Pitch | 129.058 | 129.338 |
| Minor | 128.408 | 128.783 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130 | Not specified |
| Pitch | 129.026 | 129.306 |
| Minor | 128.376 | 128.751 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130.032 | Not specified |
| Pitch | 129.058 | 129.413 |
| Minor | 128.408 | 128.883 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130 | Not specified |
| Pitch | 129.026 | 129.381 |
| Minor | 128.376 | 128.851 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 129.732 | 129.968 |
| Pitch | 128.824 | 128.994 |
| Root d3 | 127.9 | 128.128 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 129.732 | 129.968 |
| Pitch | 128.888 | 128.994 |
| Root d3 | 127.964 | 128.128 |
Cutting tap preparation
Pre-drill recommendation: 128.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 129.3 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.