M130 × 2 Metric Thread Dimensions
Nominal diameter 130 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 128.701 mm. Basic minor diameter: 127.835 mm. Basic major diameter: 130 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130 | Not specified |
| Pitch | 128.701 | 128.861 |
| Minor | 127.835 | 128.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130.038 | Not specified |
| Pitch | 128.739 | 128.939 |
| Minor | 127.873 | 128.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130 | Not specified |
| Pitch | 128.701 | 128.901 |
| Minor | 127.835 | 128.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130.038 | Not specified |
| Pitch | 128.739 | 128.989 |
| Minor | 127.873 | 128.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130 | Not specified |
| Pitch | 128.701 | 128.951 |
| Minor | 127.835 | 128.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130.038 | Not specified |
| Pitch | 128.739 | 129.054 |
| Minor | 127.873 | 128.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130 | Not specified |
| Pitch | 128.701 | 129.016 |
| Minor | 127.835 | 128.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130.038 | Not specified |
| Pitch | 128.739 | 129.139 |
| Minor | 127.873 | 128.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 130 | Not specified |
| Pitch | 128.701 | 129.101 |
| Minor | 127.835 | 128.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 129.682 | 129.962 |
| Pitch | 128.473 | 128.663 |
| Root d3 | 127.241 | 127.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 129.682 | 129.962 |
| Pitch | 128.545 | 128.663 |
| Root d3 | 127.313 | 127.508 |
Cutting tap preparation
Pre-drill recommendation: 128 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 129.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.