M125 × 8 Metric Thread Dimensions
Nominal diameter 125 mm; pitch 8 mm.
Basic geometry
Basic pitch diameter: 119.804 mm. Basic minor diameter: 116.34 mm. Basic major diameter: 125 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125 | Not specified |
| Pitch | 119.804 | 120.084 |
| Minor | 116.34 | 116.97 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125.1 | Not specified |
| Pitch | 119.904 | 120.259 |
| Minor | 116.44 | 117.24 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125 | Not specified |
| Pitch | 119.804 | 120.159 |
| Minor | 116.34 | 117.14 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125.1 | Not specified |
| Pitch | 119.904 | 120.354 |
| Minor | 116.44 | 117.44 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125 | Not specified |
| Pitch | 119.804 | 120.254 |
| Minor | 116.34 | 117.34 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125.1 | Not specified |
| Pitch | 119.904 | 120.464 |
| Minor | 116.44 | 117.69 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125 | Not specified |
| Pitch | 119.804 | 120.364 |
| Minor | 116.34 | 117.59 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125.1 | Not specified |
| Pitch | 119.904 | 120.614 |
| Minor | 116.44 | 118.04 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125 | Not specified |
| Pitch | 119.804 | 120.514 |
| Minor | 116.34 | 117.94 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 124.19 | 124.9 |
| Pitch | 119.369 | 119.704 |
| Root d3 | 114.441 | 115.085 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 124.19 | 124.9 |
| Pitch | 119.492 | 119.704 |
| Root d3 | 114.564 | 115.085 |
Cutting tap preparation
Pre-drill recommendation: 117 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 121.5 mm. Approximate formation model. Estimated formation: 64.3%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.