M125 × 3 Metric Thread Dimensions
Nominal diameter 125 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 123.051 mm. Basic minor diameter: 121.752 mm. Basic major diameter: 125 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125 | Not specified |
| Pitch | 123.051 | 123.241 |
| Minor | 121.752 | 122.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125.048 | Not specified |
| Pitch | 123.099 | 123.335 |
| Minor | 121.8 | 122.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125 | Not specified |
| Pitch | 123.051 | 123.287 |
| Minor | 121.752 | 122.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125.048 | Not specified |
| Pitch | 123.099 | 123.399 |
| Minor | 121.8 | 122.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125 | Not specified |
| Pitch | 123.051 | 123.351 |
| Minor | 121.752 | 122.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125.048 | Not specified |
| Pitch | 123.099 | 123.474 |
| Minor | 121.8 | 122.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125 | Not specified |
| Pitch | 123.051 | 123.426 |
| Minor | 121.752 | 122.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125.048 | Not specified |
| Pitch | 123.099 | 123.574 |
| Minor | 121.8 | 122.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125 | Not specified |
| Pitch | 123.051 | 123.526 |
| Minor | 121.752 | 122.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 124.577 | 124.952 |
| Pitch | 122.779 | 123.003 |
| Root d3 | 120.931 | 121.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 124.577 | 124.952 |
| Pitch | 122.863 | 123.003 |
| Root d3 | 121.015 | 121.271 |
Cutting tap preparation
Pre-drill recommendation: 122 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 123.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.