M125 × 6 Metric Thread Dimensions
Nominal diameter 125 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 121.103 mm. Basic minor diameter: 118.505 mm. Basic major diameter: 125 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125 | Not specified |
| Pitch | 121.103 | 121.353 |
| Minor | 118.505 | 119.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125.08 | Not specified |
| Pitch | 121.183 | 121.498 |
| Minor | 118.585 | 119.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125 | Not specified |
| Pitch | 121.103 | 121.418 |
| Minor | 118.505 | 119.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125.08 | Not specified |
| Pitch | 121.183 | 121.583 |
| Minor | 118.585 | 119.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125 | Not specified |
| Pitch | 121.103 | 121.503 |
| Minor | 118.505 | 119.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125.08 | Not specified |
| Pitch | 121.183 | 121.683 |
| Minor | 118.585 | 119.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125 | Not specified |
| Pitch | 121.103 | 121.603 |
| Minor | 118.505 | 119.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125.08 | Not specified |
| Pitch | 121.183 | 121.813 |
| Minor | 118.585 | 119.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125 | Not specified |
| Pitch | 121.103 | 121.733 |
| Minor | 118.505 | 119.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 124.32 | 124.92 |
| Pitch | 120.723 | 121.023 |
| Root d3 | 117.027 | 117.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 124.32 | 124.92 |
| Pitch | 120.833 | 121.023 |
| Root d3 | 117.137 | 117.559 |
Cutting tap preparation
Pre-drill recommendation: 119 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 122.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.