M125 × 2 Metric Thread Dimensions
Nominal diameter 125 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 123.701 mm. Basic minor diameter: 122.835 mm. Basic major diameter: 125 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125 | Not specified |
| Pitch | 123.701 | 123.861 |
| Minor | 122.835 | 123.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125.038 | Not specified |
| Pitch | 123.739 | 123.939 |
| Minor | 122.873 | 123.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125 | Not specified |
| Pitch | 123.701 | 123.901 |
| Minor | 122.835 | 123.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125.038 | Not specified |
| Pitch | 123.739 | 123.989 |
| Minor | 122.873 | 123.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125 | Not specified |
| Pitch | 123.701 | 123.951 |
| Minor | 122.835 | 123.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125.038 | Not specified |
| Pitch | 123.739 | 124.054 |
| Minor | 122.873 | 123.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125 | Not specified |
| Pitch | 123.701 | 124.016 |
| Minor | 122.835 | 123.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125.038 | Not specified |
| Pitch | 123.739 | 124.139 |
| Minor | 122.873 | 123.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125 | Not specified |
| Pitch | 123.701 | 124.101 |
| Minor | 122.835 | 123.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 124.682 | 124.962 |
| Pitch | 123.473 | 123.663 |
| Root d3 | 122.241 | 122.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 124.682 | 124.962 |
| Pitch | 123.545 | 123.663 |
| Root d3 | 122.313 | 122.508 |
Cutting tap preparation
Pre-drill recommendation: 123 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 124.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.