M125 × 4 Metric Thread Dimensions
Nominal diameter 125 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 122.402 mm. Basic minor diameter: 120.67 mm. Basic major diameter: 125 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125 | Not specified |
| Pitch | 122.402 | 122.614 |
| Minor | 120.67 | 121.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125.06 | Not specified |
| Pitch | 122.462 | 122.727 |
| Minor | 120.73 | 121.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125 | Not specified |
| Pitch | 122.402 | 122.667 |
| Minor | 120.67 | 121.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125.06 | Not specified |
| Pitch | 122.462 | 122.797 |
| Minor | 120.73 | 121.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125 | Not specified |
| Pitch | 122.402 | 122.737 |
| Minor | 120.67 | 121.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125.06 | Not specified |
| Pitch | 122.462 | 122.887 |
| Minor | 120.73 | 121.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125 | Not specified |
| Pitch | 122.402 | 122.827 |
| Minor | 120.67 | 121.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125.06 | Not specified |
| Pitch | 122.462 | 122.992 |
| Minor | 120.73 | 121.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 125 | Not specified |
| Pitch | 122.402 | 122.932 |
| Minor | 120.67 | 121.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 124.465 | 124.94 |
| Pitch | 122.092 | 122.342 |
| Root d3 | 119.628 | 120.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 124.465 | 124.94 |
| Pitch | 122.182 | 122.342 |
| Root d3 | 119.718 | 120.033 |
Cutting tap preparation
Pre-drill recommendation: 121 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 123.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.